Ankersmid heated lines series AHLH200

For higher temperatures

up to 200°C

Application

This electrical heated AHLH200 sample tube is designed to be connected to all Ankersmid sample elements. They are used to keep the necessary gas components above their ACID-dew point, and avoid condensation.

This is a safe way to transport the sample to a heated analyser or the special Ankersmid coolers.

Description

These AHLH200 heated lines are manufactured according to the clients needs and completely confectioned in the factory at a fixed length.

The sample line is standard equipped with a PT100 for temperature control. The heater used in this type is ONE serial resistance, twisted around the tube. Due to this construction we can not have cold zones or spots, where a potential blockage can occur.

A variety of standard lines is available but many options can be supplied as well.

See our code page Chpt. 2.1.1 for all versions.

·               Completely manufactured “ready-to-use”

·               ONE serial heater

·               Never cold spots

·               Tube 4/6, 6/8 or 8/10 mm

a)    PTFE-tube fixed

b)    PTFE-tube interchangeable

·               Integrated PT100 (others on request)

·               External temperature controller required

·               ATEX-approval available (see AHLX)